SX430 HDMI 2.0 Splitter 1 In 4 Out over CAT Extender 60m Loop Out 4K 60Hz

SX430 HDMI over LAN Splitter Extender Set 1 In 4 Out 4K 60Hz for distribution to up to five displays

With the SX430, you can distribute a 4K 60Hz HDMI signal simultaneously to up to five displays: locally via HDMI and to four remote screens via LAN cable. The transmission is lossless, latency-free, and reaches distances of up to 70 meters. Thanks to Power over Cable, you only need one power supply, and the 16 EDID profiles ensure that resolution and audio formats are optimally matched to your devices. The flexible routing of a single CAT cable per receiver makes installation particularly convenient, even over longer distances.

Output HDMI signal to five displays simultaneously

The SX430 acts as an HDMI splitter, outputting your signal to five displays simultaneously – one local display is supplied directly from the transmitter via HDMI loop-out, while four additional displays receive the same image via LAN cable. This allows you to use one display as a convenient control monitor, while the signal is simultaneously displayed on multiple remote TVs or projectors.

Extended range thanks to HDMI over LAN technology

The SX430 transmits your HDMI signal over long distances of up to 70 meters at 4K 30Hz and up to 60 meters at 4K 60Hz – stably, without loss, and without any visible delay. The set includes four receivers, each of which you connect with its own CAT6 or better network cable. This allows you to reach multiple rooms, floors, or distant areas without complicated cabling. The flexible LAN cabling enables clean, unobtrusive installations and makes the SX430 ideal for setups where many displays need to be operated synchronously.

4K 60Hz quality with HDR and extensive audio formats

The SX430 supports the full HDMI 2.0 bandwidth of 18 Gbps and outputs content in 4K 60Hz with full 4:4:4 color resolution. HDR10, HDR10 Plus, HLG, and Dolby Vision ensure strong contrasts and brilliant colors. All important audio formats are also supported – from PCM 2.0 to 7.1, including Dolby Digital Plus, Dolby Atmos, and DTS HD. This ensures that movies, presentations, and games are delivered in the best possible picture and sound quality to all connected displays.

Power over Cable for easy power supply

Thanks to Power over Cable (POC), the entire system is powered by a single power supply connected to the transmitter. The four receivers automatically receive their power via the connected LAN cables, eliminating the need for additional power supplies at remote locations. This results in fewer cables, less hassle, and a cleaner setup – even in installations with many displays and long distances.

EDID control for optimal compatibility

With 16 selectable EDID profiles, you can precisely define which audio and video formats should be transmitted to the source. You decide whether the EDID of the local display on the transmitter is used, or whether a fixed preset such as 4K 60Hz SDR or 1080p Stereo is used. This way, you avoid typical compatibility problems and ensure that all connected displays receive the best possible picture and sound quality.

Selectable EDID modes:

Technical data:

• HDMI 2.0b
• HDCP compliance HDCP 2.2 (backward compatible)
• Maximum data rate 18 Gbps
• Supported formats: up to 4K@60Hz (YUV 4:4:4), HDR10, HDR10+, Dolby Vision, HDCP 2.2
• Video resolutions: 480i60, 576i50, 480p60, 576p50, 720p50/60, 1080i50/60, 1080p24/25/30/50/60, 640x480@60, 1024x768@60, 1280x768@60, 1280x800@60, 1280x1024@60, 1360x768@60, 1440x900@60, 1680x1050@60, 1920x1200@60, 3840x2160@24/25/30/50/60 4096x2160@24/25/30/50/60
• Color formats & depth: 1080p 8-bit / 10-bit / 12-bit (YUV 420, 422, 444, RGB), 4K 8-bit (YUV 420, 422, 444, RGB), 4K 10-bit (YUV 422, 420), 4K 12-bit (YUV 422, 420)
• HDR10, HDR10+, Dolby Vision, HLG
• Audio formats ( Loop Out ): PCM 2.0–7.1, Dolby Digital, Dolby Digital Plus (incl. Atmos), Dolby TrueHD (incl. Atmos), Dolby MAT, DTS, DTS-HD, DTS-X, DSD
• Audio formats ( receiver ): PCM 2.0, Dolby Digital, Dolby Digital Plus (incl. Atmos), DTS
• Range with CAT6 cable: 70 m @ 4k 30Hz, 60 m @ 4k 60Hz
• Maximum power consumption: 10.4 W
• Power supply 12V 1A DC
• Transmitter (TX) connections: 1× HDMI input, 1× HDMI output (loop-out on the transmitter), 4× RJ45 outputs (CAT6/7 to receivers), DC 12V power connection
• Receiver (RX) connections: 1x RJ45 input each (CAT6/7 to transmitter), 1x HDMI output each
• Compatible with all common HDMI devices (e.g. Blu-ray players, game consoles, streaming boxes)
• Transmitter dimensions: 150 × 70 × 24.5 mm
• Receiver dimensions: 81 × 49 × 25 mm
• Plug & Play – no software installation required