SP410 HDMI 2.1 Splitter 1 In 4 Out | 4K 120Hz | Downscalers

SP410 HDMI 2.1 Splitter 1 In 4 Out: Enjoy 4K 120Hz on four displays simultaneously

This HDMI 2.1 splitter distributes the signal from one source device to up to four screens simultaneously. The screens can be used separately or together. No switching between screens is necessary. It can be used with TVs, video projectors, monitors, capture cards, or similar devices.

Supports resolutions up to 8K 60Hz and 4K 120Hz

It supports resolutions up to 8K 60Hz HDR and 4K 120Hz (up to 48 Gbps data rate). The SP410 is backward compatible with all lower resolutions and guarantees lossless video and audio transmission. It also offers HDMI 2.1 gaming features such as Variable Refresh Rate (VRR) to reduce stuttering and ensure smooth gameplay, and Auto Low Latency Mode (ALLM), which automatically minimizes latency to improve reaction time in games.

HDMI-CEC Pass

An HDMI-CEC pass exists between the signal input and output 1. This allows, for example, the source device to be controlled with the TV's remote control at output 1 or to switch itself on/off automatically.

4 displays simultaneously

All screens generally receive the same HDMI signal, meaning the same audio and video formats. Only if the downscaler is active, i.e., if one display supports a lower resolution than the others, is the video signal adjusted for the "lower" display.

Downscaler

If the source device delivers an 8K or 4K signal, the image is scaled down in real time for lower-resolution displays. 8K 60Hz becomes 4K 60Hz on a 4K screen, or 1080p 60Hz on a Full HD display. 4K 120Hz becomes 1080p 120Hz.

EDID Management

The SP410's EDID management ensures optimal signal transmission by automatically detecting and adapting to the capabilities of your connected displays. The EDID switch allows you to precisely adjust the signal format for the best possible audio and video experience. Connect your main display to Output 1 for high-quality playback, or optimize compatibility with other displays by easily adjusting the EDID settings.

*COPY means that the EDID data of the connected display 1 will be copied.

FRL12G enables a maximum data rate of 48 Gbps (HDMI 2.1 Maximum)

Specifications:

• HDMI version 2.1
• Supported copy protection: HDCP 2.3 or older
• Data transfer rate 48 Gbps
• Supported video formats up to 8K 60Hz YUV420 12-bit or 4K 120Hz RGB/YUV444 12-bit
• Supported HDMI 21 functions: VRR, ALLM, QMS, QFT, SBTM
• HDR (High Dynamic Range): HDR10, HDR10+, Dolby Vision, HLG
• HDMI-CEC passthrough: yes, Input <> OUT 1
• HDMI-ARC/eARC: no
• Supported audio formats: LPCM 2.0-7.1, Dolby Digital, Dolby Digital Plus (incl. Atmos), Dolby TrueHD (incl. Atmos), Dolby MAT, DTS, DTS-HD (incl. DTS-X), DSD
• Recommended HDMI cable length: in < 3 m, out < 3 m (8K/4K120Hz) or in < 8 m, out < 8 m (4K 60Hz)
• Power consumption < 5.5 W
• Dimensions (W x L x H) 145 x 68 x 18 mm
  

Please note :

• The ARC/eARC (Audio Return Channel) is not passed through . Therefore, an HDMI splitter is not suitable for transmitting a signal to a soundbar.
• The splitter can only downscale the signal to 2 defined resolutions – from 8K to 4K or 1080p, or from 4K to 1080p – not to other resolutions, not to other aspect ratios.

Note the following when using on a computer:

• An HDMI splitter cannot be used to output different image content to multiple monitors from one computer. The "Extended Desktop" or "Extend Display" function is not supported by HDMI – all monitors will always display the same image.
• For the system to function correctly, all displays should have the same aspect ratio (usually 16:9) and the same refresh rate. Different refresh rates cannot be generated. Therefore, do not use a single widescreen or 1440p monitor with the splitter. If you connect, for example, an old monitor and a new TV, you will not be able to use all the new features such as VRR and high frame rates.
• For office applications, both displays should support exactly the same video format. Scaled fonts are harder to read.